Integrating Pneumatics and Hydraulics in STEM for 4IR-ready Technology Teacher Preparation
DOI:
https://doi.org/10.63569/ajopac/07/01/03Keywords:
STEM Education, pneumatics, hydraulics, Fourth Industrial Revolution, teacher preparationAbstract
The rapid advancements of the Fourth Industrial Revolution (4IR) necessitated a transformation in Science, Technology, Engineering, and Mathematics (STEM) education, particularly in preparing pre-service and in-service teachers. As fundamental components of modern industrial automation, pneumatics and hydraulics are critical in equipping educators with the technical knowledge and pedagogical skills required to meet contemporary workforce demands. This study explores research-based effective content and pedagogical developments in technology education, emphasizing the integration of pneumatics and hydraulics into teacher training programs. Drawing from the Technological Pedagogical Content Knowledge (TPACK) framework and constructivist learning theories, the study investigates the challenges and opportunities associated with teaching these topics in a 4IR-driven educational landscape. A qualitative research approach, incorporating data from teacher training institutions, curriculum documents, and industry experts, was employed to analyze existing gaps and best practices. Findings highlight the need for competency-based, inquiry-driven instructional strategies, enhanced access to digital simulation tools, and strengthened industry-academia partnerships. The study concludes by recommending curriculum reforms and policy interventions to improve teacher readiness for the evolving technological landscape.
References
Abele, E., Metternich, J., Tisch, M., & Kreß, A. (2024). Best Practice Examples. In Learning Factories: Featuring New Concepts, Guidelines, Worldwide Best-Practice Examples (pp. 391-637). Springer.
Aboderin, O., & Havenga, M. (2024). Essential skills and strategies in higher education for the Fourth Industrial Revolution: a systematic literature review. South African Journal of Higher Education, 38(2), 24-43.
AlAli, R. (2024). Enhancing 21st century skills through integrated STEM education using project-oriented problem-based learning. Geo Journal of Tourism and Geosites, 53(2), 421-430.
Aqib, M. A. i., Ekawati, R., & Khabibah, S. (2025). A modified technological pedagogical and content knowledge (TPACK) framework: A systematic literature review. Multidisciplinary Reviews, 8(6), 2025167-2025167.
Aunzo Jr, R. T. (2025). Advancing Sustainable Development Goals With Educational Technology: Supporting STEM Education and Fostering Innovation Through Educational Technology. In Advancing Sustainable Development Goals With Educational Technology (pp. 65-98). IGI Global Scientific Publishing.
Avsec, S., & Kocijancic, S. (2014). Effectiveness of inquiry-based learning: How do middle school students learn to maximise the efficacy of a water turbine. International journal of engineering education, 30(6), 1436-1449.
BASTOS, V. B. (2021). Virtual Environments Assisted by Machine Learning for Modeling and Test of Robotic Platforms PhD dissertation, UNIVERSIDADE ESTADUAL DE CAMPINAS].
Bhattacharjya, M. (2025). Future-Proofing Education: Developing Transdiscipllinary STEAM Models to Prepare Learners for a Workforce in the Forthcoming Era of Automation. Transdisciplinary Journal of Engineering & Science, 16.
Billing, C. (2025). Enhancing Productivity: Work-Integrated Learning in the Midlands Space Cluster.
Blose, P. (2025). Pedagogical Approaches for Teaching Education for Sustainable Development in the Technology Education Curriculum. Research in Social Sciences & Technology (RESSAT), 10(1).
Both, S. (2023). Preparedness of newly qualified teachers to manage and teach in the Intermediate Phase Cape Peninsula University of Technology].
Bremner, N., Sakata, N., & Cameron, L. (2023). Teacher education as an enabler or constraint of learner-centred pedagogy implementation in low-to middle-income countries. Teaching and Teacher Education, 126, 104033.
Caratozzolo, P., Smith, C. J., Gomez, S., Moris, M. U., Nørgaard, B., Heiß, H.-U., Schrey-Niemenmaa, K., & Hadzilacos, R. (2024). A Novel Taxonomy for Continuing Engineering Education. Proceedings of 19th World Conference on Continuing Engineering Education,
Castillo Téllez, M., Castillo-Téllez, B., Mex Álvarez, D. C., García-Valladares, O., Domínguez Niño, A., & Mejía-Pérez, G. A. (2025). Solar Distillation as a Sustainable STEM Tool: Bridging Theory and Practice. Sustainability, 17(2), 594.
Channi, H. K., Kumar, P., & Dhingra, A. (2024). Application of PLC in the Mechatronics Industry. Computational Intelligent Techniques in Mechatronics, 185-209.
Conley, E. V. (2022). Employing the Future: Exploring Teacher Externship Impact on Classroom Practice Northeastern University].
del-Olmo, J., Aizpuru, I., Sanchez Alberdi, M., & Gonzalez-Jimenez, D. (2023). Teaching Model-Based Systems Engineering with MATLAB & Simulink for Smart Energy Systems.
Dianatfar, M., Järvenpää, E., Siltala, N., & Lanz, M. (2025). Template concept for VR environments: A case study in VR-based safety training for human–robot collaboration. Robotics and Computer-Integrated Manufacturing, 94, 102973.
Doh Nubia, W., Maluleke, L., & Dlamini, N. (2024). Teacher Education for the Technical and Vocational Education and Training Sector: A Misconceived or Misplaced Priority. In Critical Reflections on Teacher Education in South Africa (pp. 177-197). Springer.
Drakatos, N., Tsompou, E., Karabatzaki, Z., & Driga, A. M. (2024). Virtual reality environments as a tool for teaching Engineering. Educational and Psychological issues. TechHub Journal, 4, 59-76.
Els, C. J., Teis, N. J., & Seleke, B. (2022). 4IR Technological knowledge and skills required by Technical Engineering lectures for the effective curriculum reconstruction of TVET Engineering Programmes. Axiom Academic Publishers, 2(ISBN: 978-1-77630-468-4), 485-531.
Epaphras, N. (2025). Bridging the Skills Gap: A Case for Micro-Credentials in Academic Programs in Institutions of Higher Learning.
Ghorpade, S. C., & Sidharth, S. (2025). Smart Manufacturing in the Defence Sector: A Comprehensive Review and Analysis of Technological Advancements, Integration, and Challenges. Manufacturing Strategies and Systems, 85-103.
Glasgow, L. A. (2025). Problem Solving in Engineering: Analytical Mathematics and Numerical Analysis. John Wiley & Sons.
Govender, R., de Beer, J., Maarman, R., Chetty, R., Prinsloo, N., Botha, M. L., Dinie, S., Langenhoven, K. R., Mentz, E., & Louw, J. (2025). Future-proofing STEAME education in South Africa.
Huang, K.-Y., Chien, W.-C., Zhang, Y., Wang, S.-W., & Wang, Q. (2025). A comparative study of technological pedagogical content knowledge between special education and general education in China. Technology, Pedagogy and Education, 34(1), 19-33.
Husin, M., Usmeldi, U., Masdi, H., Simatupang, W., Fadhilah, F., & Hendriyani, Y. (2025). Project-Based Problem Learning: Improving Problem-Solving Skills in Higher Education Engineering Students. International Journal of Sociology of Education, 14(1), 62-84.
Karabegović, I., Husak, E., Isić, S., Karabegović, E., & Mahmić, M. (2021). Service robots and artificial intelligence for faster diagnostics and treatment in medicine. International Conference “New Technologies, Development and Applications”,
Kefalis, C., Skordoulis, C., & Drigas, A. (2025). Digital Simulations in STEM Education: Insights from Recent Empirical Studies, a Systematic Review. Encyclopedia, 5(1), 10.
Khamkar, A. D., & Patil, S. M. Digital Twin in Fluid Power: Review-Uses and Outlook.
Khoza, S., & Mpungose, C. (2025). Academics’ Responses to COVID-19 and 4IR Resources for Authentic E-Assessment. Curriculum Development and Evaluation, 135.
Kruger, S., & Steyn, A. A. (2024). Navigating the fourth industrial revolution: a systematic review of technology adoption model trends. Journal of Science and Technology Policy Management, 16(10), 24-56.
Leopold, L., Wolman, M., Miller, J., Flemings, M., & Education, M.-H. (2025). Fluid Dynamics in Engineering. Principles of Fluid Dynamics, 27.
Lim, W. M. (2024). What is qualitative research? An overview and guidelines. Australasian Marketing Journal, 14413582241264619.
Low, S. P., Gao, S., & Ng, E. W. L. (2021). Future-ready project and facility management graduates in Singapore for industry 4.0: Transforming mindsets and competencies. Engineering, Construction and Architectural Management, 28(1), 270-290.
Madiyala, V., & Prajapati, V. (2025). A Review of AR/VR Technologies in Simulation-Based Learning: Current Trends and Future Directions. Journal of Global Research in Electronics and Communications (JGREC), 1(1), 01-06.
Maeko, M., & Simon, A. (2024). THE DEMISE OF TECHNICAL SUBJECTS IN SOUTH AFRICA: A PERSPECTIVE FROM UNIVERSITY PRE-SERVICE TEACHERS. Asian Journal of Social Science Research, 6.
Maguire, M. (2017). Doing a thematic analysis: A practical, step-by-step guide for learning and teaching scholars.
Mahaswa, R. K., & Gebbyano, N. (2025). Bioinspired technology and the uncanny Anthropocene. Technology in Society, 81, 102801.
Maibela, P. N. (2022). Application of Strategies and Technologies for Implementing Industry 4.0 Principles in the Industrial Engineering Laboratories. University of Johannesburg (South Africa).
Masunda, O. C. (2024). Peace Education 4.0: A Curriculum Framework for Africa. Academia Lasalliana Journal of Education and Humanities 6.
Mhlanga, D., Denhere, V., & Moloi, T. (2022). COVID-19 and the key digital transformation lessons for higher education institutions in South Africa. Education Sciences, 12(7), 464.
Miller, T., & Boulton, M. (2007). Changing constructions of informed consent: Qualitative research and complex social worlds. Social science & medicine, 65(11), 2199-2211.
Miró-Pérez, A. P. (2020). World Economic Forum: present and future. Dimensión empresarial, 18(2), 1-7.
Mjenda, M., & Kyaruzi, F. (2025). Investigating the integration of technology-aided assessment methods in teaching and learning 3D geometry in Tanzanian secondary schools. Cogent Education, 12(1), 2464358.
Mpofu, F. Y., & Chasokela, D. (2025). Curriculum Design and Innovation: Higher Education Context. In Navigating Quality Assurance and Accreditation in Global Higher Education (pp. 273-292). IGI Global Scientific Publishing.
Mutembei, L. N. (2024). The Nexus between Institutional Factors and Development of Employability Skills of Technical Training Institutions Graduates in Meru County, Kenya KeMU].
Muyambi, G. C., & Ramorola, M. Z. (2025). Unveiling educators’ readiness to teach through Digital Media (DM): The case of South Africa. Education and Information Technologies, 1-28.
Mwilongo, N. (2025). Focus Group Discussions in Qualitative Research: Dos and Don'ts. Eminent Journal of Social Sciences, 1(1), 1-16.
Niess, M. L. (2016). Technological Pedagogical Content Knowledge (TPACK) Framework for K-12 Teacher Preparation: Emerging Research and Opportunities: Emerging Research and Opportunities.
Oloba, P. B. (2025). Challenges of 4IR implementation in post offices in developing countries: A case study of South Africa. Interdisciplinary Journal of Management Sciences, 2(1), a03-a03.
Omrany, H., Al-Obaidi, K. M., Ghaffarianhoseini, A., Chang, R.-D., Park, C., & Rahimian, F. (2025). Digital twin technology for education, training and learning in construction industry: implications for research and practice. Engineering, Construction and Architectural Management.
Ongartsuebsakul, P., Lham, K., Chotisupha, M., Kasai, P. K., & Panpat, P. (2024). Exploring the Implementation of Work Integrated Learning Models on the Effectiveness of Student Professionalism in Hospitality Education: A Case Study of Dusit Thani College. Journal of Humanities and Social Sciences for Sustainable Development, 7(2), 91-104.
Pahwa, S. E-LEARNING ECOSYSTEM: LEARNINGS AND WAY FORWARD. CONTEMPORARY ISSUES IN BUSINESS, MANAGEMENT, AND SOCIETY, 19.
Pawar, P. B. (2020). Industrial Hydraulics and Pneumatics. Sankalp Publication.
Piaget, J. (1972). Les notions de mouvement et de vitesse chez l'enfant. FeniXX.
Pietersen, D., & Langeveldt, D. (2024). Pre-Service Teaching and Work-Integrated Learning (WIL) in A Diverse and Democratic South African School Setting: A Social Theoretical Perspective. Journal of Comparative & International Higher Education, 16(3), 208-218.
Pietrocola, M., Schnorr, S., & Rodrigues, E. (2025). Science Education in a Risk Society: Addressing Challenges and Opportunities in an Uncertain Future. Research in Science Education, 1-20.
Prohimi, A. H. A., Juariyah, L., Bidin, R., Gunawan, A., & Syafruddin, A. B. (2024). EDUCATIONAL INNOVATION FOR INDUSTRY 4.0: AN EXPLORATION OF INTEGRATED WORK-BASED LEARNING'S CONTRIBUTION. Environmental & Social Management Journal/Revista de Gestão Social e Ambiental, 18(3).
Ramrathan, L., Maistry, S., & Blignaut, S. (2024). Critical Reflections on Teacher Education in South Africa. Springer.
Ryalat, M., Franco, E., Elmoaqet, H., Almtireen, N., & Al-Refai, G. (2024). The integration of advanced mechatronic systems into industry 4.0 for smart manufacturing. Sustainability, 16(19), 8504.
Seleke, B. (2021). Scaffolding teachers' professional development for the infusion of indigenous knowledge transfer in the Technology classroom North-West University (South Africa).].
Self, B. P., Widmann, J. M., Prince, M. J., & Georgette, J. (2013). Inquiry-based learning activities in dynamics. 2013 ASEE Annual Conference & Exposition,
Shanthi, B., Ravichandran, C., Manimegalai, V., Parashar, A. K., & Hari, B. (2025). Critical Thinking in Higher Education Through Innovative Strategies: Out-of-the-Box Thinking. In Global Practices in Inclusive Education Curriculum and Policy (pp. 365-398). IGI Global.
Shastri, S. (2025). Robotic Mechanical Systems Fundamentals. Educohack Press.
Sheng, X., & Hu, X. (2014). Teaching method reform of the hydraulic and pneumatic course based on engineering application cases. 2014 IEEE Workshop on Advanced Research and Technology in Industry Applications (WARTIA),
Shlenova, M., Yuryeva, K., Heletka, M., Kravchenko, Y., & Kravchenko, V. (2025). Distance learning in Ukrainian higher education as an aspect of the industrial revolution 4.0. Multidisciplinary Reviews, 8(4), 2025102-2025102.
Shoozan, A., & Mohamad, M. (2024). Application of interview protocol refinement framework in systematically developing and refining a semi-structured interview protocol. SHS Web of Conferences,
Simonsen, J., Svabo, C., Strandvad, S. M., Samson, K., & Hertzum, M. (2021). Situated design methods. Mit Press.
Singh, R. (2024). Navigating Through Education 5.0 Era: Imperative Competencies for Success. In Preconceptions of Policies, Strategies, and Challenges in Education 5.0 (pp. 33-50). IGI Global.
Su, K.-D. (2024). The challenge and opportunities of STEM learning efficacy for living technology through a transdisciplinary problem-based learning activity. Journal of Science Education and Technology, 33(4), 429-443.
Subramanian, S., Sampath, B., Loganathan, D. P. E., Natarajan, E., & Radhakrishnan, E. (2025). The Integration of Augmented and Virtual Reality in Modern Manufacturing. In Manufacturing Strategies and Systems (pp. 156-173). CRC Press.
Syafruddin, S., Syarif, E., Sukandar, E. R., & Kustiyono, K. (2025). Bridging the Skills Gap: The Role of Vocational Education in Developing Competent Human Resources for Sustainable Tourism. The Journal of Academic Science, 2(1), 290-299.
Teele, T. (2025). Contextual cognition of agricultural education peda-andragogical praxis in the South African higher education institutions: A systematic review. Journal of Adult and Continuing Education, 14779714241309561.
Teis, N. J., & Els, C. J. (2021). Knowledge, competencies and dispositions of lecturers in Technical Engineering in the context of advancing 4IR technologies. Journal of Vocational, Adult and Continuing Education and Training, 4(1), 62-87.
Teis, N. J., Els, P., Christo, J., & Tlali, M. F. (2022). Technical and vocational education and training landscape towards enhancing quality Engineering Studies education and training opportunities in South Africa. SunBonani Scholar.
Tuomi, I., Cachia, R., & Villar-Onrubia, D. (2023). On the futures of technology in education: Emerging trends and policy implications. Publications Office of the European Union, Luxembourg.
Van Truong, T., & Dung, T. H. (2024). The Application of Information Technology in Teaching at University and College Levels in the Context of the Fourth Industrial Revolution. European Journal of Applied Science, Engineering and Technology, 2(4), 66-73.
Verawati, N. N. S. P., & Nisrina, N. (2025). Reimagining physics education: addressing student engagement, curriculum reform, and technology integration for learning. International Journal of Ethnoscience and Technology in Education, 2(1), 158-181.
Visser, A. (2024). Teacher Education: Preparing Student Teachers to Combat Trafficking in Persons. In Critical Reflections on Teacher Education in South Africa (pp. 101-129). Springer.
Vygotsky, L. S. (1978). 4-Vygotsky.
William, F. K. A. (2024). Interpretivism or constructivism: Navigating research paradigms in social science research. International Journal of Research Publications, 143(1), 134-138.
Zhou, Y., & Divekar, R. (2025). Immersive, Task-Based Language Learning Through XR and AI: From Design Thinking to Deployment. TechTrends, 1-20.
Downloads
Published
Issue
Section
License
Copyright (c) 2025 Benjamin Seleke, Professor Nixon J. P. Teis (Author)
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
Creative Commons Attribution 4.0 International license (CC BY 4.0)
